The CCU-890 can transmit the high quality HDTV video signals and audio signals of HDTV studio cameras up to a maximum of 3000m by an optical fiber cable.
- Enables transmission of high quality HDTV video signals up to a maximum of 3000m* by an optical fiber cable. (BS-89 : a maximum of 1000m*)
- Employs the Frame Synchronizer on RET line.
*Not available at VBS RET. Available up to 2 RET lines at FS ON. - Available embedded audio signal as standard.
- Using a down converter and an up converter in the CCU, both HDTV and SDTV video are provided simultaneously. (option)
- The modules for the CCU-890 and the BS-89 are mostly the same.
- Equipped 4 HD-SDI outputs.
- With optional triax modules, the triax operations for the CCU-890 can be done. (development plan)
- Employs ARC NET interface in addition to conventional serial command control.
*In the case of the portable cameras.
Ratings | |
---|---|
Scanning System | 59.94Hz 1080 lines 59.94Hz 2:1 interlaced 480 lines 59.94Hz 2:1 interlaced 720 lines 59.94Hz 1:1 non-interlaced (option) *59.94Hz/50Hz Switchable : Factory Option 50Hz 1080 lines 50Hz 2:1 interlaced 580 lines 50Hz 2:1 interlaced 720 lines 50Hz 1:1 non-interlaced (option) *59.94Hz/50Hz Switchable : Factory Option |
Input signal | |
HDTV system | (SMPTE274M and SMPTE292M) |
Phase reference signal | PS (1Vp-p) Sync (0.6Vp-p ±6dB) 75Ω bridged, 1ch |
Return video signal | HD SDI Signal 75Ω 4ch |
SDTV system | |
Return video signal | D1 (standard), VBS(option) 75Ω 2ch/4ch *In case that VBS (option) is applied, D1 or VBS is selectable. |
External genlock signal | VBS 1.0Vp-p 75 Ω bridged, 1ch |
Q-TV signal | VBS 1.0Vp-p 75 Ω Single End, 2ch |
Intercom / Tally | |
Intercom (ENG/PROD) | 4-wire or Clearcom or RTS |
Clearcom | -15dBs 200 Ω 2ch |
Tally. contact / voltage | 0dBs R, G |
Program sound | 0dBs 600 Ω 2ch |
Output signals | |
HDTV system | |
Analog video signal (SMPTE274M)(CCU-890 only) |
Y,Pb,Pr 75 Ω each 1ch (HDTV/SDTV selectable) (R,G,B signal output is selectable by Menu) |
HD SDI signal (SMPTE292M) | 75 Ω 4ch |
WFM signal | HD-SDI 75 Ω CCU-890:2ch BS-89:1ch |
PM signal | HD-SDI 75 Ω CCU-890:2ch BS-89:1ch |
SDTV system | |
Composite video signal | VBS 1.0Vp-p 75 Ω 2ch |
Component video signal | R,G,B 0.7Vp-p 75 Ω each 1ch (CCU-890 only) (HDTV/SDTV selectable) (Y, Pb, Pr signal output is selectable by Menu) Component serial signal (D1). (SMPTE259M) 270Mbit/s 0.8Vp-p 75 Ω 2ch |
WFM signal | R,G,B,Y,ENC select 1.0Vp-p75 Ω or SDI 75 Ω CCU-890:2ch BS-89:1ch |
PM signal | R,G,B,Y,ENC select 1.0Vp-p75 Ω or SDI 75 Ω CCU-890:2ch BS-89:1ch |
Audio Signal | Mic:0dBm Low 2ch Digital audio: AES 3ID 1Vp-p 75 Ω 1ch (CCU-890 only) (In conformity with AES/EBU) |
Intercom/Tally | Intercom (ENG/PROD) 4-wire or Clearcom or RTS 4-wire 0dBm 600 Ω 2ch Clearcom -15dBs 200 Ω 2ch RTS 0dBm 200 Ω 2ch |
Ambient temperature | 0ºC ~ +45ºC |
Relative humidity | 30%~90% (Non-condensing) |
Weight | CCU-890:approx. 28kg BS-89:approx. 9kg |
Dimensions | CCU-890:W482.6 x H132.6 x D477.6mm BS-89:W219 x H125 x D457mm |
Performance | |
Video frequency response (Base Station output) | Y output Below 60Hz Falling 60 within ±1.0dB Over 30MHz Falling SDTV output signal |
Audio Frequency response (Base Station output) | Y output Below 100Hz Falling 100Hz~10kHz within +-1.0dB Over 10kHz Falling |
Power consumption | CCU-890:approx. 500VA (including 9-inch LCD color viewfinder) BS-89: approx. 80VA |
Support Products | ・broadcast/HDK-77EXa ・broadcast/HDK-790EXIII / HDK-79EXIII[α version] |
Reviews
There are no reviews yet.