SONY HDCU-900 CCU

CCU Types:

• 10243.
• 10235.
• 30171.
• 10231.
• 30150.
• 30125.
• 90027 (No Data, no Video).
• 90020 ( Supply Fault).

High Definition Camera Control Unit for the HDC-900 / 910 and HDC-950 / 930 series system cameras. Option boards are available for 525 composite analog, HD analog, 720 progressive output as well as 3:2 pulldown output from 24P imaging (HDC-900/950 only). The HDCU-900 is capable of being the control unit for the HDC-700 series in a 60i environment.

Specifications:

• Power supply – AC 100/110-120/220/240 V, 50 HZ/60 HZ
• Current Consumption – 5 A (at 100 V AC, entire system active)
• Operating temperature – +5 °C to 40 °C (+41 °F to 104 °F)
• Storage temperature -20 °C to +60 °C (-4 °F to +140 °F)
• Dimensions ( Approx. W x H x D) – 424 x 133 x 460 mm (16 3/4 x 5 3/4x 18 1/8 inches)
• Mass ( Approx.) – 20 kg (44 lb. 1 0z)
• HD SDI output – BNC type (x3), SMPTE-292M, 1080/50i, 60i, 30P, 25P, 24P
• HD monitor output – BNC type (x1), SMPTE-292M, 1080/50i, 60i, 30P, 25P, 24P
• HD SDI return input – BNC type (x4), SMPTE-292M, 1080/50i, 60i, 30P, 25P, 24P
• SD SDI output – BNC type (x4), SMPTE-259 M, Serial digital composite, 480/576-lines
• SD monitor output – BNC type, WF (x1), Pix (x1), Analog R/G/B, 480/576-lines
• Reference input – BNC type (x1, with loop-through ),HD tri-level sync or SD Black Burst
• Sync – BNC type (x1), HD tri-level sync or SD Black Burst
• Intercom PD & ENG – D-sub 25-pin (x1), 4W/RTS/CC selectable
• R-Tally/G-Tally – PGM 1/ PGM2 – 24 V power in/make contact
• MIC1/MIC2 output – PGM 1/ PGM2 – XLR-3-31 type (Female x2), 0/-20 dBu selectable
• Digital Audio output – PGM 1/ PGM2 – BNC type 9×1), AES/EBU format, 20-bit/48 kHZ
• Prompter in – PGM 1/ PGM2 – BNC type (x1, with loop-through ), Analog, NTSC/PAL/HD-Y
• RCP/MSU/CNU interface – PGM 1/ PGM2 – 8-pin (x1), Sony Camera Command Network Protocol (for entire camera system control)
• WF mode – PGM 1/ PGM2 – 4-pin, Stair step (for SD composite Waveform monitor)
• WF control – PGM 1/ PGM2 – D-sub 15-pin (x1), GPI (for SDI component WF control)
• System Expansion – PGM 1/ PGM2 – D-sub 15-pin (x1), GPI (for system control with external GPI interface)
• Trunk line – PGM 1/ PGM2 – D-sub 9-pin, RS-232C, (remote line for CHU equipment)
• Optical fiber cable interface – PGM 1/ PGM2 – SMPTE-304M based optical fie connector (x1), 1.5 Gb/s optical fiber digital transmission, SMPTE-292M, AC 240 V

Additional Detailed Information:
Product Highlights

• 4 HD SDI Return Inputs
• 4 SD SDI Outputs 480/576 lines
• 1 WF and 1 PIX analog RGB 480/576 line monitor outputs
• 1.5 Gb/s SMPTE-304M based optical fiber digital transmission interface

Accessories

• Optional: HKCU901 – SD Analog Interface Unit
• Optional: HKCU902 – HD Analog Interface Unit
• Optional: HKCU903 – Frame Rate Converter Unit
• Optional: HKCU904 – Line Converter Unit
• Optional: MSU750 – Master setup unit provides full control of the BVP and HDC series camera systems.
• Optional: RCP700 – Remote Control Panel for BVP-700/500 Series Cameras
• Optional: RCP701 – Remote Control Panel for BVP-700/500 Series Cameras
• Optional: RCP750 – The RCP-750/751 Remote Control Panel for remote control of the Sony BVP/HDC-Series Video Cameras via the CCU/HDCU-Series Camera Control Unit.
• Optional: RCP751 – The RCP-750/751 Remote Control Panel for remote control of the Sony BVP/HDC-Series Video Cameras via the CCU/HDCU-Series Camera Control Unit.
• Optional: RMM3701 – Rack Slide Kit for HDCU-900, CCU-700A, CCU-900, CNU-700, CNU-500